Articles

DUO-FLEX - TRI-SEAL

 

DUO-FLEX ACM0150, DUO-FLEX AC P1550, DUO-FLEX SA-M0656
All acrylic copolymer designed to modify hydraulic binders (Portland cement) and concrete. This copolymer will improve adhesion to cementitious coatings and increase flexibility when mixed with cement products. The copolymer will also improve water resistance, workability and elongation of two componnet mortars. It will also provide good adhesion
to old surfaces.

Can Be Used for:

  • EIFS
  • interior/exterior matte to high-gloss paints
  • primers
  • sealers
  • cement coatings
  • membranes
  • textured coating

    DUO-FLEX ACM4060
    All acrylic copolymer, very high in solids, recommended for pressure sensitive adhesive (PSA) applications. The copolymer is self-crosslinkable and contains a high level of carboxylic content, in order to adjust viscosity with pH.
    Application: Can be used as an adhesive for labels, cardboard, textiles, films, foam and double sided tapes.

    DUO-FLEX GA-1095, DUO-FLEX GA 1002
    Graphic arts polymers component: A styrene acrylic non-film forming polymer designed for use in inks and over print varnishes to be applied over paper and paperboard substrates.

    DUO-FLEX SA-M3255
    It's a low Tg styrene acrylic copolymer admixture for thin set mortars and other cement products. The copolymer improves water resistance, Young’s modulus and elongation of two component mortars. It will also provide good adhesion to old surfaces.

    DUO-FLEX SA-P2050
    It’s a styrene acrylic copolymer with good compatibility with cement. This copolymer will improve barrier resistance and has good alkali resistance. It will also improve bond strength, freeze-thaw resistance and workability of two component mortars. This 50% solids styrene acrylic copolymer was developed for EIFS (base-coat) adhesives and grouts.

    DUO-FLEX SA-P2250
    It’s a self-crosslinkable styrene acrylic emulsion copolymer with excellent water resistance and clear film. This copolymer can be used in architectural coatings, moisture vapour transmission reducers (MVTR) for roofing applications, paper coatings or textiles. The copolymer is also recommended for clear caulkings. The copolymer is compatible with acrylic thickeners (ASE or HASE), HEUR or cellulose.

    DUO-FLEX SA-P2649
    It’s a self-crosslinkable styrene acrylic emulsion copolymer with excellent water resistance, high pigment binding capacity, good alkali resistance and high shear stability. This copolymer can be used in architectural coatings (matte to high gloss), tile adhesives, plasters, masonry, cement, concrete or wood applications. It provides good strength and is considered as a general purpose polymer for construction, adhesives or coatings. It’s compatible with acrylic thickeners (ASE or HASE), HEUR or cellulose.

    TRI-SEAL SE 14 Sealer component
    A metal cross linked styrene acrylic polymer emulsion to use as a removable sealer.

    TRI-SEAL SE 60 Sealer component
    A non-metal cross linked styrene acrylic polymer emulsion to use as a permanent sealer.

    The DUO-FLEX Series is available in quantities of 20, 205, and 1000 liters.

 

Please contact us for additional information.